In Tucson, metal roofing prices typically range from $5.50 to $20 per square foot for installation, while repairs often start around $450, depending on materials, roof complexity, and other factors. We believe in transparent pricing so you can plan with confidence, and we're here to guide you through every step.
Pricing guide
These rates are indicative. Every job is unique: size, access, complexity. Request a free estimate for exact pricing tailored to your situation.
| Service | Price | Details |
|---|---|---|
| Metal Roof Installation | From $8/sq ft | Complete metal roof installation for homes across Tucson and Pima County: panel systems engineered for 100-degree heat, intense UV and monsoon storms, installed over high-temperature synthetic underlayment with proper attic ventilation, flashing and manufacturer-approved details for a 40-60 year service life. |
| Standing Seam Metal Roofing | From $10/sq ft | Concealed-fastener standing seam systems, the premium choice for Tucson homes. Panels roll-formed to length and mechanically seamed or snap-locked, with no exposed screws to loosen as desert heat expands and contracts the roof every day. Strong wind resistance and a cool reflective finish. |
| Metal Roof Replacement | From $9/sq ft | Full tear-off and replacement of sun-baked shingle, cracked tile or end-of-life metal roofs: old roofing hauled away, decking inspected and repaired, then a complete new metal system installed. Some insurers recognize impact-rated roofs, so ask yours. |
| Metal Roof Over Shingles (Retrofit) | From $7/sq ft | A new metal roof installed directly over your existing asphalt shingles, with no tear-off, less waste and lower cost. Popular on Tucson ranch homes. We check deck condition first and tell you honestly when tear-off is the better call. |
| Metal Roof Repair | From $450 | Repair of damaged, loose or storm-hit metal roofing: replacing hail-dented or punctured panels, resealing seams and penetrations, and fixing failed flashing before monsoon rain becomes interior damage. |
| Metal Roof Leak Repair | From $450 | Priority leak response for metal roofs: leaks traced to their true source (failed fasteners, seam separation, flashing gaps, pipe boots and parapet transitions) and fixed right, not just caulked over. Emergency tarping available after monsoon storms. |
| Screw Replacement & Re-Fastening | From $750 | Tucson's daily heat swings expand and contract metal roofs hundreds of times a year, so screws back out and sun-baked washers crack on older exposed-fastener roofs. Oversized screws and UV-resistant washers fix it for a fraction of replacement cost. |
| Corrugated & Ribbed Panel Roofing | From $5.50/sq ft | Exposed-fastener metal roofing (corrugated, R-panel and 5V), the budget-friendly workhorse for carports, ramadas, barns and workshops across Pima County. Quality panels in reflective cool-roof colors, installed with proper screw patterns and closures that keep out wind-blown dust. |
| Metal Shingle Roofing | From $9/sq ft | Metal shingles that deliver the look of architectural shingles, slate or shake with the lifespan of steel, a favorite for Tucson homeowners who want metal performance without the standing seam look. Lightweight and tough against monsoon wind. |
| Stone-Coated Steel Roofing | From $9/sq ft | Stone-coated steel systems combining steel strength with a textured traditional finish: strong hail and wind performance, a fire-resistant surface, and profiles that mimic the Spanish clay and concrete tile common on Tucson homes, at a fraction of the weight. |
| Copper & Specialty Metal Roofing | From $20/sq ft | Copper, zinc and aluminum roofing for accents, porches, bay windows and full architectural roofs: premium metals that develop a living patina and hold up for generations in the dry desert air. Custom fabrication for the fine details. |
| Metal Roof Coating & Painting | From $2.50/sq ft | Restoration of sun-faded, chalking or surface-rusted metal roofs: surface prep, rust treatment and high-performance reflective coating systems that extend roof life 10-15 years, restore color and cut summer heat gain without replacement. |
| Flashing, Chimney & Skylight Repair | From $600 | Repair and custom fabrication of flashing around chimneys, skylights, valleys, parapet walls and stucco transitions, the number one leak point on Tucson roofs once the monsoon arrives. In-house bent flashing for a precise watertight fit. |
| Snow Guards & Ice Protection | From $1,200 | Wind-uplift edge and ridge hardening for metal roofs: reinforced edge trim, extra fasteners at corners and ridges, and secure clips that hold panels down in monsoon outflow gusts. Honest guidance on whether your roof needs it. |
| Storm & Wind Damage Repair | Free inspection | Repair of hail, wind and monsoon storm damage to metal roofing: thorough documentation with photos, honest assessment of repair versus replacement, and help documenting your insurance claim from inspection to completed work. |
| Metal Roof Inspection | Free estimate | Complete metal roof inspections for homeowners, buyers and insurance requirements: fastener condition, seam integrity, flashing, coating and UV wear, and a straight answer on remaining service life with a written report. |
| Gutters for Metal Roofs | From $9/linear ft | Seamless gutter systems sized and mounted correctly for metal roofing: hangers that work with panel profiles and downspouts that carry sudden monsoon cloudbursts away from stucco walls and foundations, with details that handle desert dust and debris. |
| Commercial & Agricultural Metal Roofing | Free estimate | Metal roofing for barns, workshops, churches, carports and light commercial buildings across Pima County, from ranchettes and pecan groves in the Santa Cruz valley to northwest and south side shops and warehouses, with durable panel systems, insulation options and repairs. |
What Affects the Price
- Roof size and complexity : Larger roofs or those with multiple slopes, valleys, and penetrations require more materials and labor, increasing the overall cost.
- Material type and gauge : Materials like copper or stone-coated steel cost more than corrugated panels, and thicker gauges offer greater durability at a higher price.
- Accessibility and roof height : Difficult access, steep pitches, or multi-story homes may require additional safety measures and labor, affecting the final price.
- Extent of repair or replacement : Minor repairs like leak fixes are less expensive, while full replacements or retrofits over existing shingles involve more comprehensive work and higher costs.
What's included
- Travel included across the Tucson area
- Professional labor & equipment
- Old roofing tear-off & haul-away
- Job site cleanup
- Written estimate before work begins
To get an accurate estimate, have your roof's approximate square footage and details about its current condition ready. A Tucson Metal Roofing estimate includes a thorough inspection, material and labor breakdown, and a clear timeline, with no hidden fees. Call us at (520) 467-0179 to schedule your free estimate and discuss your project.
Pricing FAQ
Why do metal roofing prices vary so much?
Prices vary based on material type, roof complexity, labor, and additional services like removing old roofing or adding insulation. We provide detailed quotes to help you understand the costs.
Do you offer free estimates?
Yes, we offer free estimates for most services, including inspections and storm damage assessments. Call (520) 467-0179 to schedule your appointment.
What payment methods do you accept?
We accept cash, checks, and major credit cards. We also offer financing options to make your project more affordable. Contact us for details.