Serving the Tucson area  ·  (520) 467-0179  ·  Open Mon-Sun 7am-7pm
📞 (520) 467-0179 Free Quote

Metal Roofing in Tucson, AZ (85708) · Local Professionals

Tucson Metal Roofing · Fast response in Tucson and the Tucson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+189Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

In Tucson, roofs take a beating. From the adobe row houses in Barrio Viejo to the mid-century block ranches in Flowing Wells, every roof here faces the same relentless sun, monsoon gusts, and wide temperature swings that bake sealants and back out fasteners. Out in the Catalina Foothills, Spanish Colonial Revival homes with red clay tile sit on sloped lots, while newer stucco subdivisions in Oro Valley and Vail sport concrete tile roofs that are now hitting the age where leaks start.

We are Tucson Metal Roofing, and we have been climbing ladders across 85708 and the surrounding neighborhoods for years. Whether you are near the Reid Park Zoo or up against the Santa Catalina Mountains, we know the local roof types and the specific ways they fail. That is why homeowners call us: we show up, we know what we are looking at, and we give it to you straight.

Metal Roofing in Tucson (85708)

Tucson sits in a Sonoran Desert valley at about 2,400 feet, ringed by the Santa Catalina, Rincon, Santa Rita, and Tucson Mountains. That geography drives the work. The intense UV and summer highs above 100 degrees break down sealants and make fasteners back out on exposed-fastener panels. The July to September monsoon brings sudden cloudbursts, gusty outflow winds, and occasional hail that can lift and peel panels, separate seams, or punch holes with fallen limbs. We see a lot of active leaks through failed fasteners and flashing gaps, especially on older homes in Sam Hughes and Catalina Vista where low-pitched roofs were not built for today's storm intensity. On larger desert lots with ranchettes, ramadas, and workshops, corrugated and R-panel metal is common, and we repair and replace those too. The hard, bright light and dusty gold sunsets are beautiful, but they mean your roof is always working.

Our team has worked on everything from 1920s bungalows to 2020s stucco subdivisions. We understand how historic districts like Armory Park and El Presidio can restrict panel profiles and colors, and we know the permit requirements vary by jurisdiction. When you need a straight answer on what your roof needs, we are the local crew that has seen it before.

Our services in Tucson

How a Job Works in Tucson

Step 1: You call us at (520) 467-0179 or fill out our online form. We schedule a free on-site assessment at a time that works for you. Our team walks the roof, checks the fasteners, seams, flashing, and decking, and talks with you about what we find. You get a clear written estimate before any work starts.

Step 2: Once you approve, we pull the required permits. In Tucson, roofing permits are commonly required for a full replacement or re-roof, and thresholds, fees, and inspection requirements vary. We handle the paperwork and coordinate with the local building department so you do not have to. If you are in an HOA or historic district, we help you understand what approvals are needed. On tight lots or steep grades, we plan staging and access carefully to protect your landscaping and your neighbor's property.

Step 3: When the work is done, we clean up thoroughly. We haul away all old materials, sweep the driveway and yard with a magnet for nails, and do a final walkthrough with you. We do not leave until you are satisfied and your property is clean.

Pricing in Tucson depends on the size and complexity of your roof, access, the condition of the existing decking, and how soon you need it done. For a typical residential metal roof installation, most homeowners invest between $8 and $10 per square foot for corrugated or ribbed panel, and $10 or more per square foot for standing seam. A full metal roof replacement over worn shingle or tile often starts around $9 per square foot. If you are retrofitting metal over existing shingles, that can start at $7 per square foot. Repairs and leak fixes typically start at $450, while screw replacement and re-fastening starts at $750. Coating and painting can start at $2.50 per square foot. These are ballpark figures; your exact cost depends on your roof. Call us at (520) 467-0179 for a free estimate.

My 1950s ranch home in Flowing Wells has a low-slope shingle roof that leaks every monsoon. Can metal roofing help?
Yes. Low-slope roofs are common in midtown Tucson and on the south side, and they are prone to leaks when shingles fail. We often recommend a standing seam or exposed-fastener metal roof with proper underlayment and flashing for low-slope applications. We will assess your decking and ventilation to make sure the new roof performs.
A monsoon storm just lifted some panels on my roof near the Tucson Mall. How fast can you respond?
We prioritize storm damage calls. Call us at (520) 467-0179 and we will schedule an inspection as soon as possible, often within 24 to 48 hours depending on demand. We can tarp or secure the area to prevent further damage and provide a written estimate for repairs.
What does a metal roof cost for a typical 1,500 square foot home in Tucson?
For a 1,500 square foot roof, you might expect a corrugated or ribbed panel roof to start around $12,000 to $15,000, and standing seam to start around $15,000 to $20,000. Replacement over existing shingles can be less. These are rough ranges; factors like roof pitch, complexity, and material choice affect the final price. Call for a free estimate.
Do I need a permit to replace my roof in Tucson, and how do I check?
Yes, roofing permits are commonly required for a full replacement or re-roof. The City of Tucson website at https://www.tucsonaz.gov/ is the best place to start for local rules, and you can also call the building department directly. We handle the permitting process for you and ensure all inspections are passed.
My HOA requires a specific roof color and profile. Can you help with approval?
Absolutely. We work with many HOAs in Tucson and understand the design review process. We can provide product samples and documentation to submit to your HOA for approval. If you are in a historic district, we can also help you navigate the additional requirements.
Are you fully insured for work on my Tucson property?
Yes, we are fully insured with general liability and workers' compensation coverage. Your property and our crew are protected.
What maintenance does a metal roof need in Tucson's climate?
In Tucson, we recommend an annual inspection, especially before monsoon season. Check for loose fasteners, worn sealant, and debris buildup in valleys and gutters. We offer maintenance plans and can re-torque fasteners and replace sealant as needed to keep your roof watertight.
Why choose us?

Trusted professionals in Tucson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tucson

All your work handled by qualified professionals in Tucson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

189+ Verified Client Reviews in Tucson

⭐⭐⭐⭐⭐ 4.9/5 · 189 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tucson · Response within 24h · No commitment · ☎ (520) 467-0179

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tucson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm