Licensed & Insured, in Tucson and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Tucson
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (520) 467-0179 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Tucson and surrounding areas · On-site visits included · Free estimate within 24h
Tucson Metal Roofing is a team of local certified professionals based in Tucson. We respond quickly in Tucson and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (520) 467-0179⭐⭐⭐⭐⭐ 4.9/5 · 189 verified Google reviews
“We needed a metal roof for our hangar out in the desert and these guys knocked it out in about four days. The crew of five was on time every morning and cleaned up all the metal scraps before they left. Really solid work on a big job.”
Commercial Metal Roofing
“Had a copper awning put over our back patio and it looks absolutely gorgeous. The crew was careful with the soldering on the seams and took their time getting the patina finish right. Worth every penny.”
Copper Specialty Metal Roofing
“They re-roofed our livestock barn and the pens underneath with corrugated panels and it's holding up great through the monsoon winds. Only complaint is they took a little longer than quoted, but the price stayed the same so I can't really be upset.”
Agricultural Metal Roofing
“Our desert home had the old shingles baked to death and we went with standing seam. The crew spent almost a week on it and the finish looks incredible against the sunset now. They even walked me through the flashing details around the parapet.”
Standing Seam Metal Roofing
“Water was coming in around our vent pipe every time it rained. They came out, resealed the flashing, and replaced a handful of screws in under two hours. Bone dry through the last storm, thank goodness.”
Metal Roof Leak Repair
“I was worried about the whole mess of a roof replacement but they stripped the old metal and had the new panels on our brick house in three days flat. Cleanup was honestly better than before they started. Great crew.”
Metal Roof Replacement
“We did the retrofit over our existing shingles instead of tearing everything off and it saved us a ton of hassle. The stone-coated steel looks way nicer than I expected. Happy we went this route.”
Metal Roof Over Shingles (Retrofit)
“Had them out for a full inspection after the windstorms and they were thorough about it, checked every fastener and the gutters too. They gave me a written report and didn't try to upsell anything I didn't need. Solid, honest folks.”
Metal Roof InspectionReal photos of our work in Tucson · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation | Starting at $8/sq ft | Includes concealed fasteners, high-temp underlayment, and flashing; pitch and roof complexity move the price |
| Exposed-fastener R-panel | Starting at $6/sq ft | Economical ribbed panels for carports, ramadas, and outbuildings; panel length and access affect cost |
| Stone-coated steel or metal shingles | Starting at $9/sq ft | Tile and shake profiles with granule finish; HOA-approved colors and complex geometry raise the figure |
| Tear-off and deck repair | Quoted per project | Removal of existing layers and sheathing replacement; number of layers and rot extent drive the number |
| Travel | Included | In Tucson and surrounding Pima County areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam, simple gable roof | Starting at $10/sq ft | Includes panels, concealed clips, underlayment and trim on an accessible single-pitch roof. |
| Standing seam, cut-up hip roof | Starting at $13/sq ft | Includes extra valleys, hips and trim work on complex roof geometry with multiple planes. |
| Standing seam over existing shingles | Starting at $12/sq ft | Includes prep and underlayment over one existing layer, subject to local code limits. |
| Complex or large-scale job | On estimate | Steep pitch, multiple penetrations, historic review or HOA approval needs an on-site look first. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic metal roof replacement | Starting at $9/sq ft | Includes tear-off, deck inspection, underlayment and standard panel installation on a simple roof. |
| Standing seam replacement | Starting at $12/sq ft | Concealed-fastener panels, heavier gauge, and more labor on cut-up or steep roof sections. |
| Stone-coated steel or metal shingle | Starting at $11/sq ft | Tile and shake profiles for HOA or historic neighborhoods, priced by profile and color. |
| Decking repair and replacement | Priced per sheet | Soft or delaminated sheathing found after tear-off, quoted before any new material goes down. |
| Complex or large-scale job | On estimate | Steep pitches, multiple roof levels, historic review or heavy decking damage need an on-site look. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic retrofit, single-story ranch | Starting at $7/sq ft | Includes slip sheet, purlins, exposed-fastener panels and standard flashing on a sound single-layer shingle roof. |
| Standing seam retrofit | Starting at $10/sq ft | Concealed-fastener panels on a subframe, with premium trim and ridge; price rises with pitch and penetration count. |
| Stone-coated steel retrofit | Starting at $9/sq ft | Spanish tile profile over existing shingles; HOA or historic design review can add time and trim cost. |
| Deck repair and flashing upgrade | On estimate | Soft sheathing, chimney or skylight flashing and canale work need an on-site look before a number is given. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Targeted leak repair | Starting at $450 | Covers tracing one leak to its source, repairing the penetration or flashing, and water-testing the area |
| Screw replacement and re-fastening | Starting at $650 | Includes pulling backed-out or rusted screws on exposed-fastener panels and replacing them with correct fasteners |
| Panel replacement | Starting at $1,200 | Covers removing hail-dented or wind-lifted panels and installing matching replacements with new fasteners |
| Roof-wide reseal and re-fasten | On estimate | Needs an on-site look because scope depends on roof size, panel type and how many seams have failed |
| Travel | Included | In Tucson and surrounding areas, with no separate call-out or mileage fee added |
| Estimate | Free | Response within 24 hours at (520) 467-0179, with no obligation to book the repair |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Fastener and sealant repair | Starting at $450 | Covers replacing backed-out screws and resealing accessible seams on a single-story roof. |
| Flashing or boot replacement | Starting at $650 | Includes rebuilding a chimney, skylight or pipe boot transition with new metal and sealant. |
| Panel replacement | Starting at $900 | Matching and installing a replacement panel; price moves with profile availability and roof pitch. |
| Emergency tarping after storm | Starting at $350 | Temporary tarp secured over the leak area; permanent repair quoted separately after inspection. |
| Complex or large-scale repair | On estimate | Multiple leak points, steep or tall roofs, or historic district work need an on-site look first. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw replacement | Starting at $750 | Replaces loose, stripped or rusted fasteners on a typical single-story residential panel roof. |
| Full roof re-fastening | Starting at $1,450 | Replaces every fastener with oversized screws and UV-resistant washers on a standard home roof. |
| Washer and sealant refresh | Starting at $950 | Re-seals sound screws and lap seams, then re-torques fasteners across the roof. |
| Large or steep roof | On estimate | Needs an on-site look for staging, pitch, fastener count and panel lifting. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof (carport or shed) | Starting at $5.50/sq ft | Includes 26 or 29 gauge panels, neoprene screws, eave closures, and standard trim; price rises with roof height and access difficulty. |
| R-panel roof (workshop or ramada) | Starting at $6.25/sq ft | Includes trapezoidal ribbed panels, screw pattern for wind exposure, ridge and eave closures; cut-up roofs with valleys cost more. |
| Panel-over-panel retrofit | Starting at $7.00/sq ft | Includes new underlayment, longer screws, and new panels over sound existing metal; framing repairs and tear-off add cost. |
| Complex or large-scale job | On estimate | Multiple buildings, heavy flashing, historic district review, or structural framing repair require an on-site look before pricing. |
| Travel | Included | in Tucson and surrounding areas, no separate call-out or mileage fee for standard service calls. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book; written scope includes panel gauge and screw details. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Architectural shingle profile | Starting at $9/sq ft | Includes tear-off, underlayment, panels and standard flashing on an accessible single-story roof. |
| Slate or shake profile | Starting at $11/sq ft | Premium textured panels cost more per square, plus added labor for cut-up roof geometry. |
| Tile-profile metal shingle | Starting at $12/sq ft | HOA-compliant tile look with heavier panels and more course alignment work on the roof. |
| Retrofit over existing shingles | On estimate | Code limits on existing layers and deck condition must be verified on site before pricing. |
| Deck repair and flashing rebuild | On estimate | Soft sheathing, chimney or skylight flashing, and canales are priced after the roof walk. |
| Estimate | Free | Response within 24 hours at (520) 467-0179, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Tile-profile stone-coated steel | Starting at $9/sq ft | Includes panels, underlayment, and standard trim; pitch and tear-off move the price. |
| Shake-profile stone-coated steel | Starting at $9.50/sq ft | Includes textured shake panels and trim; roof complexity and access add cost. |
| Over existing shingles (retrofit) | Starting at $8.50/sq ft | Includes battens and panels over one shingle layer; deck condition must pass inspection. |
| Full tear-off and rebuild | On estimate | Needs an on-site look to price deck repair, disposal, and new flashing scope. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accent and porch roof | Starting at $20/sq ft | Includes formed copper pans, soldered seams and flashing; size and access move the price. |
| Standing seam in copper or zinc | Starting at $28/sq ft | Includes concealed-fastener panels and trim; roof complexity and metal gauge move the price. |
| Custom canales and scuppers | From $600 each | Includes fabrication and installation; parapet height and wall material move the price. |
| Patina finishing | From $4/sq ft | Includes controlled patina or clear finish; metal type and surface area move the price. |
| Complex or large-scale job | On estimate | Multiple roof sections, historic review or steep access need an on-site look before a number is given. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot repair and recoat | Starting at $2.50/sq ft | Targeted prep, rust treatment, and coating on isolated problem areas only, priced by affected square footage |
| Full reflective coating system | Starting at $3.25/sq ft | Pressure wash, rust converter, fastener check, and one reflective coating pass over the full roof |
| Full restoration with re-fastening | Starting at $4.50/sq ft | Screw replacement, seam sealing, rust treatment, and two-coat color restoration system included |
| Steep or complex roof | On estimate | Multi-plane, high-pitch, or skylight-heavy roofs need an on-site look before a number is given |
| Travel | Included | in Tucson and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Skylight curb re-flash | Starting at $600 | Includes inspection, removal of failed sealant, custom-bent curb flashing and a water test. |
| Chimney flashing repair | Starting at $850 | Covers saddle and counter-flashing replacement, with price rising for masonry and height access. |
| Parapet or canale re-flash | Starting at $900 | Includes cap flashing replacement and stucco transition sealing on flat and Sonoran-style roofs. |
| Valley and transition repair | On estimate | Needs an on-site look to measure lap length, deck condition and underlayment before pricing. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Porch or single-plane guard install | Starting at $1,200 | Includes guard layout, hardware and sealing on one roof plane, with pitch and access as the main cost factors. |
| Full roof edge and ridge hardening | Starting at $1,850 | Covers reinforced trim, extra corner and ridge fasteners and clips, priced by roof size and panel profile. |
| Standing seam clamp-on guard system | Starting at $2,400 | Non-penetrating clamp guards across multiple elevations, with seam spacing and roof height driving the price. |
| Guards plus fastener and sealant renewal | On estimate | Combined scope needs an on-site look to count backed-out screws, failed washers and sealant runs before quoting. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Storm damage inspection | Free | Full roof, flashing and fastener inspection with photo documentation you keep either way. |
| Minor repair (isolated panel or flashing) | Starting at $350 | Covers one to three panels or one flashing repair, priced by roof height and access. |
| Re-fastening and washer replacement | Starting at $900 | Full field screw and washer replacement, priced by roof square footage and pitch. |
| Insurance documentation package | Included with repair | Photo packet and written scope of work prepared for your adjuster at no extra charge. |
| Major storm damage or partial replacement | On estimate | Needs an on-site look to scope panel count, flashing and whether replacement is the better spend. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Pre-monsoon roof check | Free estimate | Visual and on-roof check of fasteners, seams and flashing, with written summary of findings. |
| Full roof walk inspection | Starting at $249 | Photo-documented inspection of every panel, fastener and flashing, priced by roof size and access. |
| Leak investigation | Starting at $295 | Targeted inspection of penetrations, valleys and flashing after an active leak, includes report. |
| Insurance documentation inspection | On estimate | Detailed photo report for hail or wind claims, scoped after an on-site look at roof size and access. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless gutter on a single-story metal roof | Starting at $9/linear ft | Includes on-site forming, standard hangers, one downspout per run and basic cleanup. |
| Standing seam with non-penetrating seam clamps | Starting at $14/linear ft | Includes seam-clamp hangers that protect the panel warranty plus a debris screen package. |
| Two-story or steep-pitch metal roof run | Starting at $18/linear ft | Reflects ladder and lift time, plus more downspouts and careful routing around stucco. |
| Downspout and dispersion package | Starting at $22/linear ft | Includes oversized downspouts, extensions, splash blocks or gravel trench to move water off the foundation. |
| Complex or large-scale job | On estimate | Multiple roof levels, valleys dumping onto one run, or historic and HOA design review need an on-site look. |
| Travel | Included | In Tucson and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (520) 467-0179, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Roof inspection and written assessment | Free estimate | On-site inspection with photos of penetrations, fasteners and flashing, plus a written scope recommendation. |
| Targeted repair and re-fastening | Starting at $850 | Covers failed fastener replacement, resealing and flashing repair on a sound panel field; roof size and access move the price. |
| Exposed-fastener R-panel installation | Starting at $9.50 per sq ft | Includes panels, fasteners, closures and edge metal; slope, span and deck condition are the main cost factors. |
| Standing seam or insulated panel system | On estimate | Priced from an on-site look because span, insulation and penetration count vary widely by building. |
| Travel | Included | In Tucson and surrounding Pima County communities, with no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (520) 467-0179, with no obligation to book the work. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Tucson need a crew that understands how metal actually performs in the Sonoran Desert, not a sales pitch built for a wet climate. Tucson Metal Roofing is a local contractor network built for exactly that: metal roof installation, replacement, re-roofs, and repairs on homes from the valley floor up into the foothills. We work on steep mountain pitches, roofs under heavy tree cover, and high-exposure sites where UV and heat do the real damage. We also see a large stock of aging screw-down roofs whose fasteners are backing out, and we know how to read those roofs honestly.
Our crews serve Tucson, Oro Valley, Marana, Sahuarita, South Tucson, and the surrounding communities. Whether you need a full Metal Roof Installation or a targeted repair before monsoon season, we start with the roof you have and tell you what it actually needs.
Most metal roof leaks in Tucson trace back to a short list of failures, and the number one cause on 15 to 30 year old exposed-fastener roofs is fasteners backing out. The EPDM sealing washer under each screw dries, shrinks, and cracks under intense UV and wide daily temperature swings, so the screw no longer seals against the panel. Water gets in, and the screw itself can work loose. Seam separation is the next common call: panels expand and contract with heat, and seams that were never meant to move can open up. Failed pipe boots and flashing at chimneys, skylights, and valleys are close behind, along with wind-lifted panels after monsoon outflow winds and punctures from fallen limbs.
Ignoring these problems is expensive because water does not stay where it enters. It tracks along purlins and decking, sometimes traveling far from the actual entry point before it shows up on your ceiling. By then, sheathing can be rotted and insulation soaked, which turns a small repair into a much larger one.
Our honest rule is simple: if the panels and finish are sound, a full Screw Replacement & Re-Fastening with new screws and sealing washers often restores a watertight roof for a fraction of replacement cost. If the metal is failing or the deck is compromised, we say so plainly. For active leaks, call (520) 467-0179 or request a free estimate.
We install the systems that make sense for Tucson homes, and we match the system to the roof rather than selling one product to everyone. Standing Seam Metal Roofing is the premium choice: concealed clips, no exposed fasteners, and clean lines that suit Spanish Colonial Revival and foothills homes. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, workshops, and ramadas. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing in tile profiles, and Copper & Specialty Metal Roofing for accents.
The honest comparison: standing seam costs more upfront and has no exposed screws to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate option; when it is not, tear-off is the right call.
Metal roof pricing in Tucson is usually quoted per square foot for installations, while repairs are often flat-rate. What drives the number is the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. Expect typical ranges rather than a single figure, because final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture, see our pricing page, then request a free estimate or free roof inspection so we can price your actual roof, not a guess.
After a monsoon storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. We document what we see and leave the coverage call to the people who make it.
On permits: in most jurisdictions, a permit is commonly required for a full replacement or re-roof, but requirements vary by city, and thresholds, fees, and inspection requirements differ. Historic district or HOA design review can also affect panel profile and color choices. Requirements vary, so always verify with the Tucson building or planning department before starting your project. You can also contact us with questions about your roof.
Ready to get started? Tucson Metal Roofing serves in Tucson and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Tucson · Response within 24h · No commitment · ☎ (520) 467-0179
Your Free Quote Request