Serving the Tucson area  ·  (520) 467-0179  ·  Open Mon-Sun 7am-7pm
📞 (520) 467-0179 Free Quote

Metal Roofing in Drexel Heights, AZ (85709) · Local Professionals

Tucson Metal Roofing · Fast response in Drexel Heights and the Tucson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+189Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Drexel Heights is a working-class pocket on Tucson's southwest side, where modest ranches and manufactured homes sit on wide desert lots off Valencia Road and South Cardinal Avenue. The sun here is relentless, and monsoon winds come screaming out of the Santa Cruz River corridor, so roofs take a beating year after year.

If you live in the 85709 ZIP code and your shingles are curling, your fasteners are backing out, or a monsoon gust just peeled back a panel, call Tucson Metal Roofing. We know the housing stock here, from the older block-and-stucco ranches near Drexel Road to the newer manufactured homes tucked off Camino de Oeste, and we can tell you straight whether a repair will hold or if it is time to retrofit over those shingles with a metal roof that can handle the desert.

Metal Roofing in Drexel Heights (85709)

Drexel Heights is mostly flat to gently sloping desert ground, but the lots are wide and often unpaved, with gravel yards, dirt driveways, and the occasional horse property or workshop out back. That means access is usually easy for our trucks, but the wind exposure is not. When a monsoon outflow hits, there is little to break it up, and we see wind-lifted panels, separated seams, and fasteners that have backed out of old shingle roofs all over this neighborhood. The intense UV here also bakes sealants and dries out flashing, so leaks show up at chimneys, skylights, and valleys long before the roof itself fails. Many homes here have low-slope roofs with shingle or foam, and a metal roof over shingles retrofit is often the most practical fix because it avoids a full tear-off and keeps the house dry fast.

Our team has worked roofs across Drexel Heights and the surrounding south side, from the streets near Tucson International Airport to the ranchettes off Los Reales Road. We know how to work around swamp coolers, solar panels, and the low parapets common on this side of town, and we know which fasteners and sealants actually hold up in Pima County heat.

Our services in Drexel Heights

How a Job Works in Drexel Heights

Step 1: You call us at (520) 467-0179 or request a free estimate online. We schedule an on-site assessment, usually within a day or two, and we walk the roof with you. We check for backed-out screws, rusted panels, failed flashing, and any soft spots in the decking. You get a written scope and a clear price before any work starts.

Step 2: Once you approve, we pull the permit if one is required by the local building department and schedule the work. In Drexel Heights, most jobs are straightforward access-wise, but we plan around monsoon season and summer heat, starting early and keeping the crew hydrated. If you are in an HOA or a historic overlay, we help you get the color and profile approved before we order materials. For a metal roof over shingles, we inspect the existing layers to make sure the retrofit meets code.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old fasteners, trim, and debris, and we make sure your yard, driveway, and patio are clear. You get a walkthrough of the finished roof, and we do not leave until you are satisfied.

Pricing in Drexel Heights depends on the size and pitch of your roof, the condition of the decking, access, and how soon you need it done. For a typical ranch home here, metal roof over shingles starts around $7 per square foot, and a full metal roof replacement starts around $9 per square foot. Standing seam runs about $10 per square foot and up, while corrugated or ribbed panel roofing is the budget-friendly option at about $5.50 per square foot. Repairs are common in this neighborhood: metal roof repair and leak repair start at $450, and screw replacement and re-fastening starts at $750. Storm and wind damage inspections are free, and we can document damage for your insurance claim, though coverage is always up to your carrier. Call (520) 467-0179 for a free estimate and a straight answer on what your roof actually needs.

My manufactured home off Valencia Road has a metal roof that is only a few years old, but screws are already backing out. Is that normal in Drexel Heights?
Yes, it is common here. The wide daily temperature swings and intense UV cause the neoprene washers on exposed fasteners to dry out and the screws to work loose. We replace the screws with larger, UV-resistant fasteners and re-seal the holes, which usually solves the problem without a full re-roof. We can inspect your roof for free and tell you if re-fastening is enough or if the panels need more work.
A monsoon storm just lifted a section of my metal roof and it is leaking. How fast can you get to Drexel Heights?
We prioritize active leaks and storm damage in Drexel Heights and the south side. Call (520) 467-0179 and we will schedule an inspection as soon as possible, often same day or next day depending on storm volume. We can tarp or secure the area to prevent further damage and give you a written repair estimate on the spot.
What does a metal roof over shingles cost for a typical 1,500 square foot ranch in Drexel Heights?
For a 1,500 square foot roof, a metal roof over shingles retrofit typically starts around $7 per square foot, so you are looking at roughly $10,500 and up depending on the panel type, trim, and whether any decking repairs are needed. We confirm the existing shingle layers meet code before we quote. Call (520) 467-0179 for a free on-site estimate.
Do I need a permit from Pima County or the City of Tucson for a metal roof in Drexel Heights?
Most full replacements and re-roofs require a permit, and the requirements vary depending on the jurisdiction and the scope of work. We always check with the local building department before starting and pull the permit if needed. We also make sure the installation meets current code, including limits on how many existing shingle layers can be recovered over.
My neighbor says my new metal roof panels overhang the property line. What do I do about HOA approval and property lines in Drexel Heights?
Property line issues are best resolved with a survey before work starts, and we can help you understand where the roof edge should land. If you are in an HOA, we provide the panel profile and color samples for approval and coordinate with the board so there are no surprises. We will not install until you have the approvals you need.
Is your crew covered by insurance if someone gets hurt on my property in Drexel Heights?
Yes. We are fully insured with general liability and workers' compensation coverage.
What should I do to maintain my metal roof in Drexel Heights between monsoons?
Check for backed-out screws and loose panels after every monsoon season, and rinse off dust and debris from the panels and gutters. In this climate, the biggest threats are UV degradation of seals and wind-driven rain at flashing points. We offer free inspections and can re-seal flashing and replace worn fasteners before the next storm season. Call (520) 467-0179 to schedule a preventive check.
Why choose us?

Trusted professionals in Tucson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tucson

All your work handled by qualified professionals in Tucson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

189+ Verified Client Reviews in Tucson

⭐⭐⭐⭐⭐ 4.9/5 · 189 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tucson · Response within 24h · No commitment · ☎ (520) 467-0179

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tucson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm