Serving the Tucson area  ·  (520) 467-0179  ·  Open Mon-Sun 7am-7pm
📞 (520) 467-0179 Free Quote

Metal Roofing in Flowing Wells, AZ (85705) · Local Professionals

Tucson Metal Roofing · Fast response in Flowing Wells and the Tucson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+189Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Flowing Wells is a tight-knit community just north of Tucson, where mid-century block ranches line the Rillito corridor and the lots are big enough for a ramada, a workshop, and a few saguaros. The housing stock here dates mostly from the 1950s to 1970s, with low-slope shingle, foam, and gravel roofs that have taken decades of harsh sun.

Homeowners in Flowing Wells (85705) call Tucson Metal Roofing because we understand how UV and monsoon storms punish these older roofs. We have replaced and repaired metal roofs on streets near Flowing Wells High School and along Wetmore Road, and we know the local building department and HOA requirements that come with the territory.

Metal Roofing in Flowing Wells (85705)

Flowing Wells sits on a gentle slope toward the Santa Cruz River, with many properties having gravel yards and mature desert trees like mesquite and palo verde. The low-slope roofs common here often have poor drainage, leading to ponding water and accelerated sealant failure. Our team is experienced with retrofit metal roof systems that can go over existing shingles (up to code limits) and with standing seam and R-panel installations that shed water fast. Access can be tight on some lots, and we plan material staging carefully to avoid damaging landscaping or blocking neighbors.

We have worked throughout the 85705 ZIP code, from the neighborhoods near Flowing Wells Park to the commercial strips along La Cholla Boulevard. Our crews know the local soil conditions and wind patterns, and we install roofs that hold up to the intense UV and summer monsoon gusts.

Our services in Flowing Wells

How a Job Works in Flowing Wells

Step 1: Call us at (520) 467-0179 or request a free on-site assessment. We will inspect your current roof, check for leaks and damage, and discuss options like metal roof replacement or coating. We will also review any HOA or historic district requirements that might apply to your property.

Step 2: Once you approve the estimate, we schedule the work and pull the necessary permits from the local building department. Our team arrives with materials and equipment, taking care to protect your landscaping and keep the site secure. For tight lots, we coordinate deliveries and staging to minimize disruption.

Step 3: After installation, we do a thorough cleanup, haul away all debris, and walk you through the finished roof. We make sure you understand the warranty and maintenance needs, and we leave your property clean and tidy.

Pricing for metal roofing in Flowing Wells depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and retrofit over shingles at $7. Repairs start at $450, and coating and painting start at $2.50 per square foot. We provide free estimates and explain all costs upfront, so you can make an informed decision. Call (520) 467-0179 to schedule yours.

My 1960s ranch near Flowing Wells High School has original shingles that are cracking. Can I put metal over them?
Possibly, but it depends on the number of existing layers and the condition of the decking. Local code limits how many layers you can have, and we will check that during a free inspection. If the shingles are too far gone, a full tear-off and replacement is the safer bet. We will give you honest advice either way.
A monsoon storm just lifted some panels on my roof in Flowing Wells. How fast can you respond?
We prioritize storm damage calls and can often get to your property within 24 to 48 hours for an emergency inspection. Call us at (520) 467-0179 and we will schedule a visit to secure the roof and prevent further damage.
What is the typical cost for a metal roof replacement on a 1,500 square foot home in Flowing Wells?
For a standard 1,500 square foot home, a metal roof replacement typically ranges from $13,500 to $18,000, depending on the material and roof complexity. That is based on our starting rate of $9 per square foot. We provide a detailed written estimate after inspecting your roof.
Do I need a permit to replace my roof in Flowing Wells, and what about historic district rules?
Yes, roofing permits are usually required for replacements in Flowing Wells. The exact requirements vary by jurisdiction, so we always check with the local building department. If your home is in a historic district, there may be design review for panel profile and color, and we can help you navigate that process.
My neighbor's tree branches hang over my property line. Can I trim them to install a metal roof?
In Arizona, you generally have the right to trim branches that overhang your property, but it is best to talk with your neighbor first. If the tree is in a common area or subject to HOA rules, check with the HOA. We can advise on clearance needed for installation and work with you to coordinate.
What kind of insurance coverage do you carry for roofing work in Flowing Wells?
We are fully insured with general liability and workers' compensation coverage. That protects your property and our crew.
How often should I have my metal roof inspected in Flowing Wells to prevent monsoon damage?
We recommend an annual inspection, ideally in late spring before monsoon season. Check for loose fasteners, sealant wear, and debris in valleys and gutters. After a major storm, a quick visual check is also wise. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Tucson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tucson

All your work handled by qualified professionals in Tucson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

189+ Verified Client Reviews in Tucson

⭐⭐⭐⭐⭐ 4.9/5 · 189 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tucson · Response within 24h · No commitment · ☎ (520) 467-0179

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tucson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm