Serving the Tucson area  ·  (520) 467-0179  ·  Open Mon-Sun 7am-7pm
📞 (520) 467-0179 Free Quote

Metal Roofing in South Tucson, AZ (85723) · Local Professionals

Tucson Metal Roofing · Fast response in South Tucson and the Tucson area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+189Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

South Tucson is a tight grid of small stucco and adobe homes, many built between the 1920s and 1960s, where flat roofs, parapets, and canales are still common. The lots are narrow, the sun is relentless, and monsoon rain hits hard and fast. If you live near South 6th Avenue or off South 12th Avenue, you know exactly what we mean.

Homeowners in the 85723 ZIP code call Tucson Metal Roofing because we understand the local building stock. We have worked on everything from old adobe row houses near Barrio Viejo to mid-century ranches in Midtown and the south side. When a leak shows up after a storm, or when you are ready to replace that tired shingle roof, we are the team that shows up on time and does the job right.

Metal Roofing in South Tucson (85723)

South Tucson sits in a desert valley at about 2,400 feet, surrounded by the Santa Catalina, Rincon, Santa Rita, and Tucson Mountains. The intense UV, summer highs over 100 degrees, and wide daily temperature swings bake sealants and make fasteners back out. Many homes here have low-slope roofs, parapets, and canales, which means water management is critical. The compact blocks and narrow lots can make access tricky, and we often have to plan carefully for material staging and cleanup. Older adobe and stucco homes require a gentle touch when we are fastening panels or flashing, and we always check for hidden damage from past leaks.

Our team has been serving South Tucson and the greater Tucson area for years. We know the difference between a roof on a 1920s bungalow in Armory Park and a 1970s ranch home in Flowing Wells. That local knowledge helps us recommend the right metal roofing system for your home, whether it is standing seam, corrugated panels, or stone-coated steel.

Our services in South Tucson

How a Job Works in South Tucson

Step 1: You call us at (520) 467-0179 or fill out our online form. We schedule a free on-site assessment at your South Tucson property. We inspect your roof, take measurements, and discuss your options. We also check for any signs of storm damage or leaks.

Step 2: Once you approve the estimate, we pull the necessary permits from the local building department. In South Tucson, permit requirements vary, so we handle that for you. We then schedule the work, coordinating with any HOA or historic district rules if they apply. On the day of installation, our crew arrives early, protects your landscaping, and gets to work. We use high-quality materials and follow manufacturer specifications to ensure your new metal roof performs well for decades.

Step 3: After the work is done, we do a thorough cleanup, including magnet sweeping for nails and debris. We walk you through the finished job, answer any questions, and make sure you are completely satisfied. We leave your property clean and your roof ready for the next monsoon.

Pricing for metal roofing in South Tucson depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical 1,500-square-foot home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you are replacing an old roof, expect starting prices around $9 per square foot. For a simple repair, such as fixing a leak or replacing a few screws, prices start at $450. We also offer metal roof coating and painting from $2.50 per square foot, which is a great option for extending the life of an older metal roof. Call us at (520) 467-0179 for a free estimate tailored to your South Tucson home.

My adobe house near Barrio Viejo has a flat roof with parapets. Can you install metal roofing without damaging the historic character?
Yes, we have experience with historic adobe and stucco homes. We can install metal roofing systems that respect the original architecture, often using low-profile panels or metal shingles that mimic traditional materials. We also work with you on color choices that meet historic district guidelines if applicable.
A monsoon storm just blew off some panels on my carport near South 12th Avenue. How quickly can you respond?
We prioritize storm damage calls. Call us at (520) 467-0179 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can tarp the area to prevent further damage and provide a repair estimate on the spot.
What is the typical cost to replace a metal roof on a 1,200-square-foot home in South Tucson?
For a 1,200-square-foot home, replacement typically starts around $9 per square foot, so you might be looking at $10,800 and up, depending on the material and complexity. Factors like roof pitch, accessibility, and whether we need to remove existing layers will affect the final price. We provide free estimates.
Do I need a permit to install a metal roof in South Tucson, and can you help with that?
Yes, roofing permits are commonly required for replacements and sometimes for repairs. The City of South Tucson has its own building department, and we are familiar with their requirements. We handle the permit application and inspections for you.
My neighbor's tree branches hang over my roof. What are my rights if they damage my metal roof?
In Arizona, you generally have the right to trim branches that overhang your property line, but it is best to discuss with your neighbor first. If a storm causes a branch to fall and damage your roof, your insurance may cover it. We can provide documentation for insurance claims and make repairs.
Are you fully insured for work on my South Tucson property?
Yes, we carry general liability insurance and workers' compensation coverage.
How often should I have my metal roof inspected in South Tucson?
We recommend an inspection every two to three years, and after any major monsoon storm. The intense sun and temperature swings can loosen fasteners and degrade sealants. Regular inspections catch small issues before they become leaks. We offer free inspections.
Why choose us?

Trusted professionals in Tucson

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Tucson

All your work handled by qualified professionals in Tucson

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

189+ Verified Client Reviews in Tucson

⭐⭐⭐⭐⭐ 4.9/5 · 189 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Tucson · Response within 24h · No commitment · ☎ (520) 467-0179

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Tucson ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm